425 / 1590
General Specifications
One-Piece Profiles
• Zinc-coated steel
• Concealed roller carriage mechanism with permanently lubricated, synthetic rollers
• Blumatic spring-loaded,
self-closing
action
552 Series single-extension
562 Series Full Extension
Locking Devices
• Zinc die-cast with synthetic, spring-loaded release levers
• Captive right device and ± 1/16" self-adjust tolerance on left device
• Self-adjusting drawer length tolerance
• Tool-free drawer height adjustment
Rear Mounting Brackets
(page 428)
• Zinc-plated steel or nylon
• Depth and side-to-side self adjustment
Place drawer on runners and close.
Locking devices automatically con-
nect to runners
TANDEM Drawer Removal & Adjustments
Drawer Removal
Drawer Installation
Height Adjustment
Tilt Adjustment
1. Squeeze orange handles on
locking devices.
2. Pull drawer out and up.
1. Press up on adjustment latch.
2. Push toward back of drawer.
Max. 3 mm (1/8") rise of drawer.
Rotate the tilt adjustment dial on the
rear of each profile to tilt the top of the
drawer front forward. Tool-free adjust-
ment +5 mm.
TANDEM 562 Self-Closing Concealed Runners
DECORATIVE
HARDWARE
CABINET
HINGES
AVENTOS &
LIFTS
LOCKS &
CATCHES
DOORS &
DRAWERS
SLIDES
LIGHTING ORGANIZERS
KITCH./BATH
SHELF &
CLOSET
EDGING &
DECOR.WOOD
FURNITURE
HARDWARE
ADHESIVES LACQUER &
FINISHES
ABRASIVES
SHOP &
FINISHING
FASTENERS
TOOLS
DOOR
HARDWARE
SLIDES
800.533.0533
2021
1946
425
Prices subject to change without notice.
CHARLESMCMURRAY.COM