

Solvent Borne
*LTL ONLY
items on
this page
LACQUERS & FINISHES
800.533.0533
2021
1946
987
Prices subject to change without notice.
CHARLESMCMURRAY.COMDECORATIVE
HARDWARE
CABINET
HINGES
AVENTOS &
LIFTS
LOCKS &
CATCHES
DOORS &
DRAWERS
SLIDES
LIGHTING ORGANIZERS
KITCH./BATH
SHELF &
CLOSET
EDGING &
DECOR.WOOD
FURNITURE
HARDWARE
ADHESIVES
LACQUER &
FINISHES
ABRASIVES
SHOP &
FINISHING
FASTENERS
TOOLS
DOOR
HARDWARE
Clawlock
®
SL 275 Primer/Undercoater
Post-Catalyzed, Interior, Solvent Borne
A post-catalyzed HAPs compliant, two-component (alkyd-amino)
formulation. It was developed for interior wood surfaces. It's
easy sanding and provides an excellent base coat for the start
of a high-performance 275g/l VOC pigmented finishing system.
Item No.
Size
List Ea.
MLC-W121429-11 Gallon
$160.26
MLC-W121429-55 Gallon
$794.46
Catalyst
Item No.
Size
List Ea.
MLC-C1431-QQuart
$64.08
MLC-C1431-1
1 Gallon
$195.78
Where to Use
Can be used on wood or MDF board, kitchen
and bathroom cabinets, dormitory, household,
office or laboratory furniture, display fixture and
wood parts of upholstered furniture.
Other Products
For catalyst use: C1431 Care Catalyst
For a 275g/l VOC topcoat use: MW12142X
Stealth 275 Series
For reducer use VOC compliant solvents.
Dry Times at 77°F
Dry to Touch: 25 ± 10 minutes
Sanding Dry: 60 ± 10 minutes
Stacking Dry: 12 hours minimum
% Solids by Weight 54.5 ± 2
% Solids by Volume 36.2 ± 2
Pot Life ± 8 hours
VOC
COMPLIANT
ADD
CATALYST!
AHAPs-free, 550 VOC compliant, fast dry, easy sanding pre-catalyzed
primer/undercoater. Specially formulated for use as the first coat
under M.L. Campbell®Pre-catalyzed Pigmented Lacquers. It exhibits
very good adhesion on wood, particleboard and hard boards. It
also has good holdout over porous surfaces such as soft wood and
untempered hard board. Sands very well to produce an excellent
base coat with outstanding holdout of topcoats. Especially developed
for filling the open pores on MDF board.
Item No.
Size
List Ea.
MLC-W115749-11 Gallon
$111.44
MLC-W115749-55 Gallon
$550.64
MagnaClaw™ Primer/Undercoater 550
Pre-Catalyzed, White, Solvent Borne
A high performance, high solids, two-component post-catalyzed
(alkyd-amino) primer/undercoater. Provides an excellent base coat
for the start of a high-performance pigmented finishing system.
Formulated with an ultra low formaldehyde release. Good production
properties and excellent sanding characteristics. Especially developed
for filling the open pores of MDF board. Can also be used on wood.
Item No.
Size
List Ea.
MLC-W37011-11 Gallon
$140.64
MLC-W37011-55 Gallon
$696.64
Catalyst
Item No.
Size
List Ea.
MLC-C1431-QQuart
$64.08
MLC-C1431-1
1 Gallon
$195.78
Where to Use
Can be used on wood or MDF board, kitchen
and bathroom cabinets, dormitory, household,
office or laboratory furniture, display fixture and
wood parts of upholstered furniture.
Other Products
For catalyst use: C1431 Care Catalyst
M.L. Campbell Lacquer Thinner (C16036)
M.L. Campbell Care Retarder (C1611)
M.L. Campbell Care Reducer (C1621)
Dry Times at 77°F
Dry to Touch: 10 - 20 minutes
Recoat Time: 15 - 30 minutes
Stacking Dry: 16 hours plus
% Solids by Weight 46 - 51
% Solids by Volume 30 - 34
Pot Life ± 8 hours
VOC 590 g/l (4.93 lbs./gallon)
Clawlock
®
Black Primer/Undercoater
Post-Catalyzed, Interior, Solvent Borne
ADD
CATALYST!
Where to Use
Can be used on wood or MDF board, store
fixtures, cabinetwork, interior paneling and
trim, furniture or any application where a fast
dry primer with excellent product handling
characteristics is required. Amazing Glaze may
be applied over MagnaClaw if you allow Mag-
naClaw to dry at least 12 hours. Formulated for
job shop application.
Other Products
MagnaMax Pre-catalyzed Pigmented Finishes.
M.L. Campbell Lacquer Thinner (C16036),
M.L. Campbell Care Retarder (C1611), or M.L.
Campbell Reducer (C1621).
Dry Times at 77°F
Dry to Touch: 7 minutes - dust-free
Recoat: 30 minutes
Handle: 60 minutes
% Solids by Weight 51.38 ± 2.5
% Solids by Volume 33.38 ± 2.5
Packaged VOC
524 g/l (4.37 lbs./gallon). (VOC shown is as
packaged. If material is reduced VOC may be
higher depending on reducer used.)
Available for an
Additional Fee
FOR CATALYST INFO
see page 989