Charles McMurray Co. 2021 Catalog

985 / 1590

Solvent Borne
*LTL ONLY
items on
this page
LACQUERS & FINISHES
800.533.0533 2021 1946 985 Prices subject to change without notice.
DECORATIVE
HARDWARE
CABINET
HINGES
AVENTOS &
LIFTS
LOCKS & CATCHES
DOORS & DRAWERS
SLIDES
LIGHTING ORGANIZERS
KITCH./BATH
SHELF & CLOSET
EDGING & DECOR.WOOD
FURNITURE HARDWARE
ADHESIVES
LACQUER &
FINISHES
ABRASIVES
SHOP & FINISHING
FASTENERS
TOOLS
DOOR
HARDWARE
MagnaSand® Sealer
Pre-Catalyzed, Interior, Solvent Borne
Awater white pre-catalyzed 24%non-volatile (byweight) lacquer
sealer with thermo set properties. Can be used as a sealer for
pre-catalyzed lacquers.
Item No. Size List Ea.
1 Gallon $77.70
5 Gallon $382.20
Where to Use
Recommended for shop finishing of kitchen
cabinets or institutional furniture where a pre-
catalyzed lacquer is needed.
Dry Times
Dry to Touch: 10 minutes
Sanding Dry: 20 minutes
Stacking Dry: 12 - 24 hours
% Solids by Weight 21 - 25
% Solids by Volume 14 - 18
Packaged VOC 672 g/l (5.6 lbs./gallon)
Level Sealer™
Acid Post-Catalyzed
Interior, Solvent Borne
A high solids, water white formula specifically designed for
interior wood surfaces that are exposed to moisture, heat and
household chemicals. It was also designed so that you can build
the dry mils past the normal 5 mils maximum recommendation.
Use if you want to have a full fill or thick build look and you do
not want to go to polyurethane. It gives good sag resistance
and can be sprayed from 4-10 wet mils on a vertical surface. It
can also be built with multiple thin coats to get 10-12 dry mils
by allowing each coat to dry thoroughly.
Item No. Size List Ea.
1 Gallon $136.62
5 Gallon $676.86
Catalyst
Item No. Size List Ea.
Quart $64.08
MLC-C1431-1 1 Gallon $195.78
Where to Use For kitchen cabinets or institutional furniturewhere extra moisture resistance is needed.
Other Products
For Catalyst use: C1431 Care Catalyst.
Level Sealer™ has a thixotropic viscosity and
does not need to be reduced; viscosity will
reduce with shear from spraying.
If reduction is necessary use: C16036 Standard
lacquer thinner or C1621 Care Reducer.
NOTE: Reducing the Level Sealer™ will reduce
the sag resistance of the product and its ability
to build.
WoodSong II Microton Toners or WoodSong II
stains are the only stains recommended for use
with M.L. Campbell products.
Dry Times
Dry to Touch: 30 - 60 minutes
Sanding Dry: 1 hour
Stacking Dry: 5 - 8 hours
% Solids by Weight 45 ± 2.0
% Solids by Volume 37 ± 2.0
Pot Life 24 hours
Packaged VOC 525 g/l (4.38 lbs./gallon)
VOC as applied
(catalyzed at 5%) 541 g/l (4.51 lbs./gallon)
ADD
CATALYST!
Catalyst.................................... 989
Reducer/Retarder.............994-996
Thinner..................................... 993