Charles McMurray Co. 2021 Catalog

907 / 1590

Toe Kick for ADA Sink Base Doors
Pre-manufactured recessed toe kick for ADA sink base doors.
Made of durable, lightweight polystyrene. ADA compliant. 1/4"
adjustment in all directions to reflect door gap distances, floor
and floor covering conditions. Trimmable up to 6" each door
side at hinge end. White finish, but can be laminated, painted,
or covered with rubber or vinyl toe base. Available in 2" or 3"
setback. Sold in sets of 1 left and 1 right-hand toe kick. White
trusshead screws included.
Item No.
Inside Cabinet
Side-to-Side
Total Width
Trimmable To
Fit Openings Setback List Set
34-1/2" 36" down to 24" 2" $59.24
34-1/2" 36" down to 24" 3" $58.12
46-1/2" 48" down to 36" 2" $71.18
46-1/2" 48" down to 36" 3" $68.50
3-7/8" height
2" or 3" setback
The Solution for Solid Panel Doors
Using will center the panel and absorb panel expan-
sion due to temperature changes. Saves time and money in the
reduction of expensive remakes.
Use 8 per door (2 per side), approximately 2 to 3" in from end
of panel, in stiles and rails. If door is extra wide use 3
in top and bottom rails. Allow 1/8" space around panel for
During drier time periods, allow an additional 1/16"
space to account for excessive or extreme humidity.
• Centers solid panels
• Compresses if panels expand
• Stops panel rattle
• Helps eliminate cracking glue joints
.260" diameter fits standard stile and rail cutters.
.232" diameter fits 3/16" groove.
Packaged 5,000 (5M) per bag. Sold per 1,000 (1m).
Item No. Description List m
.260" dia. Standard (Black) $44.00
.232" dia. for 3/16" Groove (Tan) $47.74
Synergy Spacers
• Diameter: .265 - .270"
• Best used in 1/4" groove
• Recommended minimum
spacing is 3/16"
• No oil squeeze-out
• Sold per thousand (m)
Item No. List m
List m
5
List m
40
$56.82 $53.19 $47.17
Item No. Setback (A) Length List Pair
3" 12" $34.84
4" 12" $35.06
Metal Toe Kick for ADA Base Doors
3-1/2"
2-1/4"
A
• Allows the toe kick to swing out with the cabinet door
• Provides unimpeded access for wheel chairs
• Can be used for sink, counter, desk and other work areas
• Elongated screw holes provide adjustment
• Plate has tabs to align it to the door bottom
• 18 gauge steel, white powder-coated
• Sold per pair with screws
DECORATIVE
HARDWARE
CABINET
HINGES
AVENTOS &
LIFTS
LOCKS & CATCHES
DOORS & DRAWERS
SLIDES
LIGHTING ORGANIZERS
KITCH./BATH
SHELF & CLOSET
EDGING & DECOR.WOOD
FURNITURE HARDWARE
ADHESIVES LACQUER &
FINISHES
ABRASIVES
SHOP & FINISHING
FASTENERS
TOOLS
DOOR
HARDWARE
FURNITURE HARDWARE
800.533.0533 2021 1946 907 Prices subject to change without notice.