986 / 1645
Solvent Borne
DOOR
HARDWARE
TOOLS FASTENERS SHOP &
FINISHING
ABRASIVES
LACQUERS &
FINISHES
ADHESIVES FURNITURE
HARDWARE
EDGING &
DECOR.WOOD
SHELF &
CLOSET
ORGANIZERS
KITCH./BATH
LIGHTING SLIDES
DOORS &
DRAWERS
LOCKS &
CATCHES
AVENTOS &
LIFTS
CABINET
HINGES
DECORATIVE
HARDWARE
LACQUERS & FINISHES
800.533.0533
986
Prices subject to change without notice.
McMurray.com
VOCCOMPLIANCEVARIESCHECK
LOCALREGULATIONS
Level Sealer™
Acid Post-Catalyzed, Clear
Interior, Solvent Borne
High solids, water white formula designed so you can build the
dry mils past the normal 5 mils maximum recommendation.
Use for a full fill or thick build without polyurethane. Good sag
resistance, can be sprayed from 4-10 wet mils on a vertical
surface, can also be built with multiple thin coats to get 10-12
dry mils by allowing each coat to dry thoroughly.
Item No.
Size
List Ea.
MLC-C117029-1
1 Gallon
$138.98
MLC-C117029-5
5 Gallon
$688.50
Catalyst
Item No.
Size
List Ea.
MLC-C1431-Q
Quart
$65.20
MLC-C1431-1
1 Gallon
$199.16
MLC-C1491-1
1 Gallon
$107.48
Where to Use
Specifically designed for interior wood surfaces
exposed to moisture, heat and household
chemicals. For kitchen cabinets or institutional
furniture where extra moisture resistance is
needed.
Other Products
For catalyst use C1491 Care Catalyst (10%) or
C1431 Care Catalyst (5%). Level Sealer™ has
a thixotropic viscosity and does not need to be
reduced; viscosity will reduce with shear from
spraying. If reduction is necessary use C16036
Standard lacquer thinner or C1621CareReducer.
NOTE: Reducing Level Sealer™ will reduce the
sag resistance of the product and its ability to
build.
WoodSong II Microton Toners or Wood-
Song II stains are the only stains recommended
for use with M.L. Campbell products.
Dry Times
Dry to Touch: 30 - 60 minutes
Sanding Dry: 1 hour
Stacking Dry: 5 - 8 hours
% Solids by Weight 45 ± 2.0
% Solids by Volume 37 ± 2.0
Pot Life 24 hours
Packaged VOC 525 g/l (4.38 lbs./gallon)
VOC as applied
(catalyzed at 5%) 541 g/l (4.51 lbs./gallon)
ADD
CATALYST!
VOCCOMPLIANCEVARIESCHECK
LOCALREGULATIONS
POLARION™ Isolante Sealer
Post-Catalyzed, Clear
Interior, Solvent Borne
(For Oily Wood)
Two-component polyurethane offering exceptional adhesion
as tie coat or barrier coat.
Designed to be catalyzed with
MLC-C35677 POLARION Catalyst. Do not use any other
catalyst.
Item No.
Size
List Ea.
MLC-C38179-1
1 Gallon
$243.12
Catalyst
Item No.
Size
List Ea.
MLC-C35677-Q
Quart
$80.40
MLC-C35677-1
1 Gallon
$279.56
Where to Use
Specifically designed for interior wood surfaces
rich in natural oils or marginally contaminated.
For table and bar tops, cabinets, millwork,
furniture and fixtures.
Other Products For catalyst use MLC-C35677 POLARION only.
Dry Times
Dry to Touch: 30 minutes
Sanding Dry: 45 - 60 minutes
Stacking Dry: 6 hours
Pot Life ± 4 hours
Packaged
Blended A:B :: 5:1
% Solids by Weight 29.0 ± 2.0
36.9 ± 2.0
% Solids by Volume 21.6 ± 2.0
28.5 ± 2.0
Packaged VOC 667.5 g/l
(5.57 lbs./gal.)
606 g/l
(5.06 lbs./gal.)
ADD
CATALYST!
Catalyst.................................... 995
Reducer/Retarder........ 1000-1002
Stain................................. 996-997
Thinner..................................... 999